Benefits of No Compromise Wi-Fi

The wireless edge of the network has become ubiquitous, and so too have our expectations of a reliable and secure connection. As we have become used to the convenience of connecting wherever and however we want, we tolerate the flaws in a typical Wi-Fi connection—pauses in downloads, occasional drop-outs where we must re-connect, and lengthy waits as we try to join a public Wi-Fi network. For our personal browsing, we make a conscious compromise between convenience and reliability because apart from being frustrating at times, no real harm is done. But in a business environment, reliable wireless connectivity can’t be a compromise for critical operations, especially where it can be the difference between life and death.

Why multi-channel is not always the best choice

Most Wi-Fi networks operate on a multi-channel architecture (aka “micro-cell”), where each wireless access point (AP) connects to a mobile client using one of several radio channels. To achieve optimal throughput to each client, it’s important to have good signal strength but minimal radio interference by ensuring that the APs are not too close, and the same radio channels do not overlap (called “co-channel interference”). However, this can be difficult when there may be physical layout constraints, and there are only a few channels to choose from – and even harder in a multi-tenancy building when your neighbour chooses the same channels as you! To assist with this, tools are used to survey the physical site to plan the channel map for the optimal experience, but these tools can be expensive and time consuming to use effectively. This is how typical Wi-Fi networks are designed, and why they occasionally exhibit reliability glitches.

Some years ago, an alternative architecture was proposed that utilised the same radio channel for all APs in the network. In this model, placement of the APs was no longer critical because they all used the same channel, so interference was not an issue. If coverage was poor in one location, then additional APs could be easily deployed without worrying about introducing bandwidth-destroying interference. Although the single-channel architecture solved one of the biggest challenges of Wi-Fi network design, it too had some limitations, the main one being that its total network throughput was usually lower than multi-channel.

Since then, multi-channel Wi-Fi has become the predominant architecture and most of the time, it does a great job. However, there are some situations where multi-channel is not the best choice, and alternative solutions can provide a better experience. Applications of this type usually fall into three categories:

  1. Dynamic physical environments, like warehouses, where radio coverage is continuously being changed as objects are moved and removed. This makes multi-channel planning almost impossible, so the work-around is to deploy more APs. Unfortunately, this not only increases cost, but it introduces more radio interference, which reduces data throughput.
  2. Environments that must have reliable connectivity to mobile devices, like hospitals, where even a momentary loss of data connectivity can have a serious effect. As a wireless client moves, its connection will “roam” to another AP when it perceives a significantly more attractive signal. Unfortunately, this roaming process can sometimes be slow and disruptive as security credentials must be established or re-negotiated. Often this can manifest as an annoying lag on a VoIP call, or random artefacts in video. One solution is to use only wireless clients that support “fast-roaming” protocols, or intelligent bridging devices that handle the roaming on behalf of the client. Both these solutions add complexity and cost.
  3. Environments where there are many roaming wireless users, like schools, hospitals, public venues, etc. Multi-channel struggles to cope in these situations because only one client can talk to an AP at a time. So, having more clients associated with an AP means there is less time for each client to talk, so the effective bandwidth to each client is reduced. Adding more APs doesn’t always help because co-channel interference increases, which also reduces bandwidth.

What’s needed is a cost-effective Wi-Fi solution that combines the best features of both architectures: multi-channel’s throughput with single-channel’s easy deployment and reliable, seamless roaming connectivity.

Luckily, there is a solution that allows the user to select multi-channel, single channel or both, for the optimal Wi-Fi experience. Previously, users had to choose one architecture or another, and where it was desirable to run both multi-channel and single-channel systems on premises, they had to manage two different networks with different tools. Administration efforts were increased because firmware updates had to be applied twice, and engineers had two different systems to learn and maintain.

What does Allied Telesis have?

Now, with the new Hybrid Wireless solution from Allied Telesis, a Wi-Fi network can be deployed with a mix of channel architectures and administered using the same management tool. Using the name “Channel Blanket” for the single-channel architecture, the Hybrid Wireless APs can offer both multi-channel and Channel Blanket at the same time! Operating at the fastest Wi-Fi speeds available today, they are the ideal choice for reliable Wi-Fi in the challenging environments described above:

  1. In a dynamic environment, Channel Blanket APs can be deployed in greater numbers than multi-channel APs because their single radio channel does not introduce interference. If greater bandwidth is required then the APs can be configured to support up to 3 blankets concurrently, which significantly increases capacity in dense AP environments.
  2. Channel Blanket has the advantage in an environment that requires reliable roaming too. With single-channel, all APs in the network appear as if they are a single AP, so the mobile client only sees that it is connected to one large AP. When the client moves, the Wi-Fi controller assigns it to a new AP, so the client is unaware of the “roam” and needs no special features to support it (e.g. fast-roaming protocols). Not only does this simplify the client, but it means the Wi-Fi connection is not interrupted by the move, and no latency is introduced, or data lost. Note that although new standards have been ratified to facilitate better roaming (e.g. IEEE802.11k/v/r), only high-end, modern wireless clients support these standards (e.g. iPhone6 with iOS7 and later). Clients that do not support these standards will still experience some disruption or data loss when roaming on multi-channel wireless networks.
  3. In an environment with a high client density, Channel Blanket can increase the available bandwidth by enabling more APs to be installed in the same area without introducing co-channel interference. Although this is possible with multi-channel too, Channel Blanket solutions require no channel planning so installation and management is much easier.

Until now, customers that required industrial-grade Wi-Fi, high-density coverage or seamless roaming had to make a choice between multi-channel and single-channel architectures. With multi-channel, high client density is difficult to achieve, and you risk having wireless clients that do not support fast roaming protocols; with single-channel you risk using an “unconventional” solution requiring disparate management tools. To mitigate these risks, customers wanted to use both architectures together, but until now, this required two different wireless systems or many complex work-arounds, which were cost prohibitive.


The new Allied Telesis Hybrid Wireless solution uniquely enables customers to configure both architectures simultaneously on the same hardware to best suit their specific application. Customers now have the flexibility to configure their wireless LAN to provide multi-channel coverage for some clients and Channel Blanket for others—useful when some clients want the best bandwidth, and others need seamless roaming for nonstop connectivity. Combined with our innovative Autonomous Wireless Controller (AWC), which is a unified, easy-to-use management tool that continually tunes the APs for optimal coverage, the Hybrid Wireless solution is an effective alternative to the compromises and work-arounds of multi-channel Wi-Fi.

To find out more about Hybrid Wireless and how you can have a no compromise Wi-Fi experience with reduced administration effort at a reasonable cost, contact Allied Telesis.

Share article

Software license agreement

Allied Telesis Asia Pacific Pte. Ltd. (hereinafter referred to as “our company”) and the customer agree to the following regarding the software products provided with this agreement. Notwithstanding the above agreement, this agreement shall be concluded when the customer exercises the right of use described in paragraph 2. In addition, if there is a separate license for the software or software module you are using, that will be given priority.
  1. Definition
    This software refers to the following four.
    • This firmware
    • This program
    • This definition file
    • This printed matter
    This firmware refers to the following two.
    • A program built into or installed in the main product to operate the main product
    • Program modification module to operate the main product by incorporating or installing it in the main product
    This program refers to the following two.
    • A set of programs provided by us that run on a computer
    • A modification module for programs that run on a computer provided by us.
    This definition file refers to one of the following.
    • Original data provided by us when performing comparison processing on the main product
    This printed matter refers to the following two items.
    • All printed and digitized material contained in the software
    • Printed and digitized material provided for future use of the software
  2. Right to use
    In accordance with the terms of this Agreement, we grant you the following non-exclusive, non-transferable rights in Japan:
    • This firmware or license or feature license is built-in or first installed for up to the number of purchases of the main product or license or feature license that you purchased or rented from us or an agent that can sell our products. Right to use the product in the operating environment described in this printed matter. However, if the expiration date is set, it can be used only for the specified period.
    • The number of purchases of a license for this program purchased or rented from us or an agency that can sell our products to a computer system suitable for the operating environment described in this printed matter or an equivalent operating environment Right to install and use up to the limit.
    • The right to use this printed matter for the purpose of using this firmware and this program licensed under this agreement.
    • The right to copy the software for backup purposes only. However, a copy of this software shall have the same copyright notice as the original software.
  3. Prohibited matter
    • You may not copy the Software or any part thereof for any purpose except as specified in the preceding paragraph.
    • This software cannot be used in any way other than what is stated in this printed matter.
    • This firmware and feature license can be used for more than the number of main product products for which you have purchased or rented, or for the number of licenses, and can only be used for the main product that was originally installed.
    • This program cannot be used for more than the number of main products purchased or rented or the number of licenses.
    • You may not reverse engineer, disassemble or decompile the Software or any part thereof. In addition, the customer may not modify or modify this software or a part thereof.
    • You may not delete or modify the display of intellectual property rights such as copyrights, patents, and trademarks described in connection with this software.
    • You may not assign or sublicense the rights granted in this Agreement to a third party, and you may not sell, rent or transfer the Software to a third party. However, this does not apply when it is used together with the main product and the transferee or the loanee is allowed to take over all the obligations under this agreement.
  4. Limitation of liability
    • We make no warranty as to the functionality, quality, or defects or infringement of the rights of third parties regarding this software, except as specified in this agreement.
    • We are not responsible for any indirect or incidental damages or lost profits caused to you or a third party due to this software. In no event shall the total amount of liability we incur to you or any third party due to this software exceed the amount actually paid by you in consideration of your license to use this software.
    • We do not guarantee the interoperability with other companies’products and applications (including freeware and shareware), and whether it is known or unknown, such as attacks on the main product, system or network.
    • We will only modify this software if we deem it necessary.
  5. Attribution of rights
    We or our parent company, Allied Telesis Holdings, Inc., owns the copyright, patents, trademarks, know-how and all other intellectual property rights relating to this software, or grants re-licensing rights from third parties. I am licensed for the right. Except for the rights expressly granted to you under this Agreement, all rights relating to this software belong to us, our parent company Allied Telesis Holdings, Inc. or any third party to which we are licensed. Reserved.
  6. End
    • You may terminate this Agreement at any time by disposing of the Software and all copies thereof.
    • If you violate any provision of this Agreement, we may immediately terminate this Agreement without prior notice and terminate your right to use the Software. In this case, you shall immediately dispose of the Software and all copies thereof.
    • Even if this agreement is terminated, the price paid by the customer for this software will not be refunded for any reason.
    • The provisions of paragraphs 3, 4, 5, 6, 6, 7, 8 and 9 of this Agreement shall remain in effect after the termination or termination of this Agreement. I will.
  7. Compliance with export-related laws and regulations
    When the customer takes this software or the main product on which this software is installed out of Japan or provides it to non-residents referred to in the “Foreign Exchange and Foreign Trade Law”, the Japanese government including the “Foreign Exchange and Foreign Trade Law” We agree to strictly comply with the export-related laws and regulations of foreign governments, and we will carry out all necessary procedures at your own risk and expense.
  8. General terms
    If any provision of this Agreement or any part thereof is invalidated by law, such part shall be removed from this Agreement.
  9. Governing law
    This contract is governed by the laws of Japan. The Tokyo District Court shall have exclusive jurisdiction as the first instance for the resolution of disputes arising out of this Agreement.

Allied Telesis Asia Pacific Pte. Ltd